In this report we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to look at some of the more advanced tips and techniques which you can use.
For those who have a dog that likes to bark, and particularly if your dog loves to play in the garden and other regions of the home, you need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it’s actually quite simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not just cut a rectangular shape out of the cardboard, so you’ll need to cut around the edge of the mask so that you get something which resembles a cone. The main thing here is to be realistic with what kind of paper plate that you’re using.
Then you will need to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so that you can ensure that nothing will leak once you place the mask on. Make sure that the edges are cut so the edges are not sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask , so you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint http://www.lacueillettedequinsac.com/?p=139905 on the edges so that it runs over the cardboard.
Don’t fret too much about the paint getting stuck to your mask. It’s easy to remove it later, and it’ll leave you with a nice finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint after you’re done, so that you don’t end up with smudges or smears on your dog.
Then it’s time to glue the mask onto your dog’s head. First you will need to make sure that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you can start to glue the mask on the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and then fold it over. Make certain it’s quite strong and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you have the mask snugged securely onto the surface of your dog. Do not make the folds too big or else it could look messy. As soon as you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other area of the mask on the dog. Be sure that the ears are level and make sure that it’s not too short or long as this can cause some issues with the mask slipping off the dog’s face.
If you are using a dog mask as your dog protection, you’ll have to do some sanding to make certain it is safe on your dog. You can do this by sanding off any excess paper which might have been removed from your mask.